2 Channles receiver with three button remote controls

EV1527  Learning Code Remote
Support Learning Code EV1527 Common Chip. Compatible with the most of learning Remote Control Relay Panel. 

Operation Method: (leanring code 1527)
1. Match code:
Hold learning button and learning indicator light blinks, then press any button of remote control (If it'sa transmitter module, pls power it to transmit; If it's a wireless smoke/gas/door sensor/PIR sensor,pls trigger it to transmit), if indicator lights flashes 3 times, match code successfully.
PS: Maximum 20 remote controls can be matched
2. Delete code:
Hold learning button till the indicator LED lights and then off, delete successfully.

Notes: Operation of deleting code can delete all stored information in the receiver.

Set Working Mode on receiver:
T & L program the sequence as follows:
1.Jumper on T→ Toggle
2.Jumper on L→ Latch
3.No Jumper on T &L→ Momentary
Short Introduction of Working Mode:
The following introduction will describe how momentary, latching and toggle working using
example of typical two channel receiver. The transmitter button A controls channel 1 while transmitter button B controls channel 2.
1. Toggle - Press A , Channel 1 ON and remains ON, Press A again, Channel 1 OFF
2. Momentary - Press and hold A , Channel 1 ON, Release A, Channel 1 OFF
3. Latch - Press A , Channel 1 ON and remains ON while Channel 2 OFF, Press B ,Channel 2 ON and remains ON while Channel 1 OFF

For more information pls contact with me at email aimee@zdremote.com
or wechat and whatsapp +*************

Adopts imported high-frequency triode, owning 13dbm Transmitting Power.
Easy to use: Easy to install and use, the 4 channel remote control system lets you take control of your gadgets, car and home or garage.
Widely Use: Perfect Suitable for controlling electrically operated gate, retractable door, garage door, electric curtain automobile, motorcycle and other telecommand equipment.
 
Appliance
1. Vehicle central locking systems  
2. Garage doors  
3. Electronic gates  
4. Electrical appliances/Home automation i.e. lights
5. Car sunroofs  
6. Car/Motorbike alarms
 
Easy to use, the 4 channel remote control system lets you take control of your gadgets,  car, home and garage.
 
Note:
1.This remote control only support the learning code (1527)  or with learning function and high compatible receiver
2.This remote can not be programmed.
3.It will not work if you only buy the transmitter. it is parts of the remote control system, it needs work with the Remote Control Relay Receiver module to achieve controlling.
4, You can but this remote to learn to your learning code r