DC 9-24V Delay Learning Controller Self-Locking Delay Garage Gate Switche RF Remote Controller Module

Product Name: Mini Case 12V 1 CH Remote Control Switch

Model Number: AK-C220904

Type:Switch Toggle

Application:universal, Home Appliance

RF Frequency:433MHz default(315MHz optional)

Operating Voltage:DC9-24V

Static Current:≤10mA

Operating Temperature:-40~80℃

Receiver Sensitivity:≥-95dB

Output Current:≤10A

Working Mode:inching, self-locking, interlocking (adjustable)

Output Mode:Contact output (AC/DC)

Size: 40.5*26*48.4mm

Weight: 16.5g

Instruction

(1) Learning code operations

Click once on the controller's code learning button (close to the receiving module button), the controller indicator light will light up, and then press any button on the remote control to transmit a signal. When the controller receives the signal, the indicator light will flash to indicate successful code learning.

(2) Working mode switching

Inching/delay mode: Remove the jumper cap on the controller to switch to inching/delay mode.

Self-locking mode: Use a jumper cap to short the 2 and 3 row pin ports to switch to self-locking mode.

Interlock mode: Use a jumper cap to short pin ports 1 and 2 to switch to interlock mode.

(3) Delay setting instructions

1. After connecting the controller to the power supply, remove the jumper cap on the controller.

2. Click the controller setting button once (near the terminal button), and the indicator light flashes 3 times to enter the delay setting mode.

3. After the indicator light flashes, click the learn code button. Press the learn code button once to increase the delay by 1 second. The total can be increased to 99 seconds. After increasing to the required delay seconds, click the button again to set the indicator light to flash 3. time to exit the delay setting mode.

(4) Instructions for exiting delay mode

Click the setting button once and the indicator light will flash 3 times. After the indicator light flashes, click the setting button again. The indicator light will flash 3 times again to indicate exiting the delay mode. After exiting the delay mode, return to the inching working mode.

(5) Code clearing operation

Press and hold the code learning button on the controller for 5 seconds until the indicator light flashes, indicating that the code clearing is successful.