关注 “环球资源外贸” 官方微信，获取实时外贸资讯
Product Information
Key Specifications/ Special Features
This RF coaxial jumper cable assembly adopts Ipex 1st Generation terminal to SMA female connector, matched with RG1.37 high-frequency coaxial wire.
All core conductive components adopt gold-plated silver process, which greatly reduces signal loss and improves transmission stability under high-frequency working conditions.
The product is assembled with silicone dust cap, EVA heat shrinkable tube, insulating washers and fastener accessories for full protection.
With excellent shielding performance and low insertion loss, widely used in wireless communication modules, IoT equipment, WIFI module, Bluetooth module, wireless transmission equipment and internal radio frequency signal connection of antenna equipment.
Compact overall structure, stable mechanical connection, good anti-vibration performance, suitable for long-term continuous indoor equipment operation.
| Serial number | Name | Specification | Materials |
|---|---|---|---|
| 8 | Washer | Ø8.7 | gold-plated silver |
| 7 | Washer | Ø9.5*6.5 | gold-plated silver |
| 6 | Nut | 1/4-36UNS-2B | gold-plated silver |
| 5 | Dust cap | Ø7*10 red | silicon |
| 4 | Connector | SMA female | FEP, gold-plated silver |
| 3 | Heat Shrinkable Tube | Ø2.5*15 | EVA |
| 2 | Cable | RG1.37 single silver & black | Cu,FEP,Silver,etc. |
| 1 | Terminal | Ipex 1st Generation | Copper |
Bluetooth module, IoT wireless transmission equipment
Miniature wireless antenna built-in jumper wire
Smart terminal radio frequency receiving device
Industrial wireless data transmission equipment
Test instrument RF test connecting wire
Remote monitoring wireless module equipment
RG1.37 coaxial cable has soft bending performance, not easy to break after repeated bending
Gold-plated silver conductive parts effectively resist oxidation, extend service life
FEP high temperature resistant insulation layer, adapt to equipment continuous heating working environment
Complete auxiliary accessories for easy on-site assembly and fixed installation
Standard 50 Ohm radio frequency impedance, matched with most wireless modules on the market
Strict finished product testing: impedance test, insertion loss test, tensile test
A: Standard 50 Ohm RF impedance, universal for wireless communication modules.
A: Yes, we support customized wire length for mass orders. Please advise your required length.
A: This product adopts Ipex 1st Generation standard interface, compatible with most Ipex1 generation wireless modules.
A: Designed for indoor equipment built-in wiring. If outdoor deployment is needed, extra waterproof treatment is required.
If you are sourcing reliable Ipex1 to SMA-F RG1.37 RF jumper cables for wireless communication module equipment, this cable assembly is your ideal choice.
We maintain stable production capacity for bulk orders. Welcome to send inquiries for samples and competitive bulk quotation.
This RF coaxial jumper cable assembly adopts Ipex 1st Generation terminal to SMA female connector, matched with RG1.37 high-frequency coaxial wire.
All core conductive components adopt gold-plated silver process, which greatly reduces signal loss and improves transmission stability under high-frequency working conditions.
The product is assembled with silicone dust cap, EVA heat shrinkable tube, insulating washers and fastener accessories for full protection.
With excellent shielding performance and low insertion loss, widely used in wireless communication modules, IoT equipment, WIFI module, Bluetooth module, wireless transmission equipment and internal radio frequency signal connection of antenna equipment.
Compact overall structure, stable mechanical connection, good anti-vibration performance, suitable for long-term continuous indoor equipment operation.
| Serial number | Name | Specification | Materials |
|---|---|---|---|
| 8 | Washer | Ø8.7 | gold-plated silver |
| 7 | Washer | Ø9.5*6.5 | gold-plated silver |
| 6 | Nut | 1/4-36UNS-2B | gold-plated silver |
| 5 | Dust cap | Ø7*10 red | silicon |
| 4 | Connector | SMA female | FEP, gold-plated silver |
| 3 | Heat Shrinkable Tube | Ø2.5*15 | EVA |
| 2 | Cable | RG1.37 single silver & black | Cu,FEP,Silver,etc. |
| 1 | Terminal | Ipex 1st Generation | Copper |
Bluetooth module, IoT wireless transmission equipment
Miniature wireless antenna built-in jumper wire
Smart terminal radio frequency receiving device
Industrial wireless data transmission equipment
Test instrument RF test connecting wire
Remote monitoring wireless module equipment
RG1.37 coaxial cable has soft bending performance, not easy to break after repeated bending
Gold-plated silver conductive parts effectively resist oxidation, extend service life
FEP high temperature resistant insulation layer, adapt to equipment continuous heating working environment
Complete auxiliary accessories for easy on-site assembly and fixed installation
Standard 50 Ohm radio frequency impedance, matched with most wireless modules on the market
Strict finished product testing: impedance test, insertion loss test, tensile test
A: Standard 50 Ohm RF impedance, universal for wireless communication modules.
A: Yes, we support customized wire length for mass orders. Please advise your required length.
A: This product adopts Ipex 1st Generation standard interface, compatible with most Ipex1 generation wireless modules.
A: Designed for indoor equipment built-in wiring. If outdoor deployment is needed, extra waterproof treatment is required.
If you are sourcing reliable Ipex1 to SMA-F RG1.37 RF jumper cables for wireless communication module equipment, this cable assembly is your ideal choice.
We maintain stable production capacity for bulk orders. Welcome to send inquiries for samples and competitive bulk quotation.
,Buying Office ,Consultant ,Distributor ,Exporter ,Importer ,Manufacturer ,Online Seller ,Trading Company ,Wholesaler Global Sources Consumer Electronics
Global Sources Gaming
