Product function
1. Bluetooth remote control function
2. Full keyboard input function
3. Infrared and wireless transmission
4. Infrared learning function
Pairing: Long press the HOME button for 10 seconds, the orange indicator light flashes quickly, and it enters the pairing mode.
Bluetooth device name: Amazon Fire TV Remote.
Fire TV Stick/BOX pairing steps
1. Restart the Fire TV Stick/Box
2. When the Fire TV Stick/Box enters the main interface, press and hold the Home button of the CR3 remote control for 10 seconds, the CR3 orange light flashes quickly to enter the pairing mode.
3. The Fire TV Stick/Box will automatically connect to the CR3 remote control. When the connection is successful, the orange LED will automatically turn off, and the pairing is successful.
Note: Press the OK+HOME button at the same time for 1 second to start pairing.
Pairing timeout: 10 minutes.
After the automatic pairing is successful, the indicator light goes out.
Infrared learning
Operating instructions for learning function: (combined keys to enter the single-key learning method)
1) Click the key + tv key that needs to be learned, such as POWER + TV, release it, and the red LED will be on continuously, indicating that it has entered the learning mode and is waiting for the learning signal;
2) Point the original remote control at the remote control within 3cm, press and hold the learned button of the original remote control to keep sending the code. After the remote control receives the infrared signal emitted by the original remote control, the LED flashes 3 times Off, it means that the learning signal is successfully received and the learning is automatically exited.
3) If you need to learn other keys, repeat steps 1)~2), just change the POWER key to other keys.
4) After entering the learning, there is no operation within 10 seconds to exit the learning.
Learnable buttons: 10 buttons in total.
10 learnable buttons. The TV button does not learn. Infrared learning button, infrared code is sent after learning, but Bluetooth code is not learning.
Press and hold C+A on the keyboard, the red indicator flashes 4 times and the code is cleared.
8. LED working status indication
1. Send Bluetooth key value and flash orange LED light
2. The infrared code value flashes red LED light
3. There is no Bluetooth connection. After pressing the button and releasing it, the orange light flashes slowly for 10 seconds.
